Primary Ingot

NAM EXIM can supply High Grade Aluminum Ingots conforming to LME grade P 1020A, High purity ingots.
A typical chemical analysis of Ingots we can supply are given below:

PACKING

Strapped in Bundles of 44 pcs. (1 Mt approx.- Each piece of ingot is around 22 kgs)
Strapped in Bundles of 100 pcs. (0.8 Mt approx.- Each piece of ingot is around 8 kgs)

Alloy Ingot

Aluminum Alloy Ingots are produced form Primary/ Secondary Grade material in high capacity furnaces.
During Casting, metal is degassed using an inline Launder treatment Process, them filtering through CFF. The quality coming out of our suppliers’ plants can be used for different application assuring high quality of product maintaining consistency.

Purity 99.7 min. EC GRADE 99.85 min. 99.7 min 99.8 min
Si 0.10 max. 0.11 max. 0.08 max. 0.7 max.
Fe 0.16 max. 0.025 max. 0.10 max. 0.08 max.
Mu 0.005 max. 0.01 max. 0.005 max. 0.005 max.
Mg 0.002 max. - 0.002 max. 0.002 max.
Cu 0.01 max. 0.04 max. 0.005 max. 0.005 max.
Zn 0.004 max. - 0.004 max. 0.004 max.
Ti 0.002 max. 0.02 max. 0.002 max. 0.002 max.
V 0.005 max. (Ti+V) 0.005 max. 0.005 max.
Na 0.005 max. - 0.005 max. 0.005 max.
Ca 0.002 max. - 0.002 max. 0.002 max.
Ga 0.02 max. - 0.02 max. 0.002 max.
Cr 0.002 (Zr, Cr) Each 0.01 max. 0.002 0.002
Ni <0.002 - <0.002 <0.002

Note : MOQ conditions shall apply.

Purity ADC-12 (JIC H 5302) Lm 6 (BS 149 -1988) Lm 24 (BS 1490 - 1988) ALS-132 (BS 1490 -1988)
Cu 1.5-3.5 0.0 – 0.10 3.0 – 4.0 1.7 – 2.50
Si 9.6 – 12.0 10.0 – 13.0 7.5 – 9.50 11.0 – 12.50
Mg 0.0-0.30 0.0 – 0.10 0.0 – 0.10 0.0 – 0.30
Zn 0.0 – 1.0 0.0 – 0.10 0.0 – 3.0 -
Fe 0.0 – 0.9 0.0 – 0.60 0.0 – 1.30 0.70 – 1.0
Mn 0.0 – 0.50 0.0 – 0.50 0.0 – 0.50 0.0 – 0.50
Ni 0.0 – 0.50 0.0 – 0.10 0.0 – 0.50 0.0 – 0.30
Sn 0.0 – 0.30 0.0 – 0.05 0.0 – 0.20 -
Ti - 0.0 – 0.20 0.0 – 0.20 -
Pb - 0.0 – 0.10 0.0 – 0.30 -
Cr - - - -
Cd - - - -
Alu Bal Bal Bal Bal
Ni <0.002 - <0.002 <0.002